Mobile Products
Scanner Applications
Select your application type in the dropdown below:
Mobile Scanner Guide
Mobile Service Provider
Terrestrial Mobile Mapping
Ambercore's TITAN® is a revolutionary Mobile LIDAR scanning system that performs high speed data acquisition for corridor applications requiring high accuracy and dense data sets.
The TITAN® system incorp-orates Riegl’s LMS-Q210 terrestrial laser scanners. The Riegl lasers were selected because they have proven to be reliable, accurate, and robust, even in the most challenging conditions. This includes surveys of hundreds of miles of rugged roads in Afghanistan. The system’s positioning system is composed of a dual-frequency GPS receiver and a proprietary Inertial Navigation System.
 |
 |
View Larger |
View Larger |
Four Riegl LMS Q210 lasers make up the lidar engine of the TITAN® system. The four lasers are aligned when installed in the system, and have proven to be totally reliable and rugged. TITAN® has never experienced a laser failure or alignment problem in more than twoyears of operation on over 85 corridor projects in North America.
 |
 |
View Larger |
View Larger |
These rugged weatherproof sealed units allow TITAN® to successfully operate in dusty environmental conditions which would not be possible with other laser scanners. For more information you can either contact Riegl USA directly via our contact form on this site, email or phone or Terrapoint (contact below).
View Larger
TITAN® Hardware Components - Sensor Pod
| Applications | System Characteristics |
| Engineering Design Surveys for : | Specifications for TITAN® : |
| - Highways and Railroads - Urban Streetscape Inventories - Airport Runways - Industrial Facilities - Tunnels and Bridges |
- Internal point-to-point accuracy of 2m - Vertical accuracies of 2.5cm (at 95% - 2 sigma) - Compiles data safely at highway speeds in traffic flow - Collects point density from 100-800 points per square meter. - Works day or night with complete safety - In vehicle operation eliminated crew exposure to traffic hazards |
System Specifications
| Component | Manufacturer | Model Num. | Specification | Operating Range | |
| Laser | Riegl | LMS-Q120i-80 (x4) | 30 kHz - 80 degree Field of View | -10°C | +50°C |
| IMU | iMAR | RQHAIRSURV-003 | 0.005 degree accuracy (roll/pitch) 0.008 degree accuracy (heading) 0.5 nautical mile/hr (drift) | -40°C | +71°C |
| Video Camera | PixelLink | PL-A782 | 1.3 Megapixel | 0°C | +50°C |
| GPS (GNSS) | Novatel | OEM 5 | 26 channel dual frequency | -55°C | +70°C |
| Equipment Rack PDSU |
Terrapoint | NG600 | Ruggedized Command/Control Rack | -40°C | +85°C |
Using Ambercore's 4D-iQ capabilities and Terrpoint's services, TITAN® Mobile LiDAR data can be fused with Airborne LiDAR to produce comprehensive 3D models of areas of interest.
Contact Ambercore:
For more information please visit the Ambercore website http://www.ambercore.com of feel free to Contact Ambercore directly.
© 2008-2009 Riegl USA. All Rights Reserved.